Hey, guys welcome back again. Today we will go to upload a very interesting and new project. Edge detection Arduino robot is a very popular project on the internet nowadays. If you want to make that robot on your own you have to just follow the instructions. We have given all the required steps and details over there. We share the code, circuit, and making instructions. If you really want to make this awesome bot you need a basic overview of Arduino, programming, and some basic electronics. We already uploaded a very brief tutorial on Arduino and other electronics. So, if you really want to learn the concepts you can read the other article also you can bookmark our website. So, now let’s get started without any delay.
The edge-avoiding smart robot works like when any sensor detects the edge the robot will turn according to the sensor direction. It means if the right side sensor comes near the edge then the Arduino robot will make a turn in the opposite direction which is the left side 7 vice-versa. Otherwise, if there is no edge the robot will move forward continuously, and there is no instruction for backward moving direction. Can you guess the application of this robot?
Also, you can make your own PCB with the PCBWAY. always I used the PCBWAY PCB service.
Working with this edge detection robot is very simple. there is some sensor we are using in this robot that senses the edge. and transfer this information to the microcontroller which is working as a brain in this Arduino robot this microcontroller will decide what will be the next step according to the inputs from the sensor. Basically, we are using the IR sensors in this robot. two IR sensors we are using in this edge detection robot. front two corners select for the sensor location and attach the sensor in the downward direction the face of the sensor is downward so that the sensor can sense the edge before the robot. so that the robot never falls. if there is an edge at any sensor the robot will turn accordingly. For more detail visit our website.