Dogmote

#include <neoPixel.h>
const int PIXPIN=D2;
const int PIXCT=1;
Adafruit_NeoPixel pix(1,D2,WS2812B);

const int W=A5; // Water Sensor
int water;

#include <Adafruit_BMP280.h>
bool status;
int tempF;
int tempC;
Adafruit_BMP280 bmp;

#include "ioTClassroom_CNM.h"
SYSTEM_MODE(MANUAL);

const int NUMBULBS=6;
const int BULB=1;          //Room Lights, make sure to tell all 6 bulb not just on 2
int color;

#include "Adafruit_GFX.h"
#include "Adafruit_SSD1306.h"
#define OLED_RESET D4
Adafruit_SSD1306 display(OLED_RESET);
#define XPOS 0
#define YPOS 1
#define DELTAY 2                      //OLED

Button buttonB(A0),buttonR(A1);
bool b,r;

int bb,rr,dd;
int x=0;         // more delay creates more button "lag"

void roomDark();         //list of functions
void roomRed();
void roomBlue();

void setup() {
  Wire.begin();
  status=bmp.begin(0x76);
  // if(status==false){
  //     Serial.printf("BMP280 at address 0x%02X failed to start\n", 0x76);
  //   }
  pix.begin();
  
  pinMode(W,INPUT);
  pinMode(D10,OUTPUT);   //Blue's
  pinMode(D9,OUTPUT);       //Red's
  pinMode(PIXPIN,OUTPUT);

  display.begin(SSD1306_SWITCHCAPVCC, 0x3C);
  display.clearDisplay();
  display.display();
  // Serial.begin(9600);
  // waitFor(Serial.isConnected,15000);
  WiFi.on();
  WiFi.setCredentials("IoTNetwork");
  WiFi.connect();
  // while(WiFi.connecting()) {
  //   Serial.printf(".");
  // }
  // Serial.printf("\n\n");
}

void loop() {
  display.setRotation(1);                //temp oled display
  bmp.readTemperature();                 //using tempf to automatically control wemo1&2 and 
  tempC=bmp.readTemperature();
  tempF=(tempC*1.8)+32;                  //converting temp
  display.setTextSize(1);
  display.setTextColor(WHITE);
  display.setCursor(0,0);
  display.printf("%iC\n",tempC);
  display.printf("%iF\n",tempF);
  display.display();
  // Serial.printf("%iC\n",tempC);
  // Serial.printf("%iF\n",tempF);
  display.clearDisplay();
  if(water<=50){
      display.printf("Water\nNeeded");     //set by water sensor
    }
  display.display();
  water=analogRead(W);
  // Serial.printf("%i\n\n",water);
  int blind;
  blind=map(water,0,955,255,0);  //little to no water, neopixel max brightness
  pix.setBrightness(blind);
  pix.setPixelColor(0,0x008000);
  pix.show();

  if(buttonB.isClicked()){
      b=!b;                         //blue button toggle
    }
  if(b){
      digitalWrite(D10,HIGH);
      switchON(3);
      roomBlue();
    }
  else{
      digitalWrite(D10,LOW);
      roomDark();
      switchOFF(3);
    }
  if(buttonR.isClicked()){
      r=!r;                         //red button toggle
    }
  if(r){
      digitalWrite(D9,HIGH);
      switchON(1);
      roomRed();
    }
  else{
      digitalWrite(D9,LOW);
      roomDark();
      switchOFF(1);
    }
  if(tempF==70){
    digitalWrite(D10,LOW);
    digitalWrite(D9,LOW);
    roomDark();
    switchOFF(1);
    switchOFF(3);
  }
  if((tempF>=65)&&(!r)){                 // automatic function
      digitalWrite(D10,HIGH);
      switchON(3);
      roomBlue();
    }
  if((tempF<=75)&&(!b)){
      digitalWrite(D9,HIGH);
      switchON(1);
      roomRed();
    }
}
//Functions to clean code
void roomDark(){
  for(dd=1;dd<=6;dd++){
      setHue(dd,false,0,0,0);
    }
}
void roomRed(){
  for(rr=1;rr<=6;rr++){
      setHue(rr,true,HueRed,255,255);
    }
}
void roomBlue(){
  for(bb=1;bb<=6;bb++){
      setHue(bb,true,HueBlue,255,255);
    }
}