In the first example, we will send “Hello world” command to blink the LED. In the second example, we will do bidirectional communication.
In this tutorial, you are going to learn about interfacing the button with Arduino using the Arduino digitalRead function.
Alarm Clock with Arduino.
ESP8266 ESP-01 chip provides a really low cost and effective way to communicate over the internet.
ESP8266 is the best module for simple IoT projects but we need to flash compatible firmware on it so it can work smoothly with the hardware.
This project will guide you to set up an alarm system using a motion detector.
Use the Serial Monitor in the Arduino IDE with your ATtiny.
Control a Servo Motor with Arduino and a pushbutton. Servo only rotate when the pushbutton is pressed.
In this tutorial, we'll learn how to set up BLE GATT services to make a thermometer using Intel's Arduino 101
A simple project template showing how to establish a connection between two ESP32-based devices. Works both in LAN and through the Internet.
Take readings in real-time through the Arduino IDE's interface.
Able to point in a specific direction or turn by degrees, this motor is a staple in home automation and robotics.
An in-depth exploration of controlling your Arduino with a button!
My project is a button controlled siren with different LED transitions. You can change the siren sound with each press.
There are a lot of tutorials, on how to control Servos with joysticks, or analog sensors, but sometimes we need to control them with buttons
Run Golang on this old but still popular 8-bit AVR microcontroller.
My project is about how to make a smart home with IoT.
This project is using my MusicWithoutDelay library to play multiple sounds at the same time.
This project is meant to teach how to access Digital IO pins in ATmega328P in Assembly as well as C code.
nRF24L01 radio transceiver provides very efficient and inexpensive way to establish communication between microcontrollers.
Arduino based traffic lights using car lights delay to enable safe pedestrian crossing.
Make your own custom GoPRO shutter using a MKR1000 board, 3 buttons and 3 LEDs.
It's a Gyro+Accelerometer controlled mouse with a button. Made using Leonardo,Gesture Mouse takes CounterStrike to a whole new level!