An attempt to build a beer pong playing robot with questionable results.
It uses a 3D printed arm from free resources with my code to recognise the human moves and control the arm
Minimalistic Emergency ventilator with fine control over BPM, tidal volume and flow rate, with a digital interface.
We will try to make a simple CNC machine with you.
Moves chess pieces around the board invisibly and seemingly magically.
An automatic DIY photography turntable for all the techie photographers out there.
A mini CNC machine made out of cheap materials with a stunning result.
This is 3-axis CNC plotter/engraver based on GRBL software and 2020 aluminum extrusions. Low-cost engraving and PCB manufacturing dual side.
Introducing MARK 1, the programmable Arduino Robot Arm. But, that's not all, this Robot Arm can be controlled by Hand Gestures. Here's How..
This is my homemade CNC machine using Arduino, Easydrivers and old CD-Rom(s). I use Grbl and G-Code sender to execute the G-Code.
We will try to make a simple Triple CNC machine with you and so different others...
An easy method to control the stepper motor driven EEZYBOT MK2 robotic arm using a CNC shield and an Arduino Uno.
Using the legacy of brilliant mathematicians, this robot solve the cube in 18 seconds or less.
A touch-free germs disinfecting device that can disinfect anything from masks, wallets to mobile phones, killing maximum germs using UV-C.
It is an enclosed zen garden built into an end table.
Disassemble an old printer (in this case a dot matrix) and drive the stepper motor(s) for linear motion or rotation. With Arduino.
A 3D scanner that makes 3d models in a graphic interface .
Hardware platform combined with DeepLib, an easy to use but yet powerful DeepStream based Python Library, and a web IDE
Hello friends this post is about DIY self balancing robot in this post I’ll show how you can build your own Self balancing robot.
In this project, I create a sound location finder. This circuit can be used as the basic building block to a robot that reacts to sound.
My new created machine to clean glass roofs.
A full featured stepper control involving speed and line interpolation for 2-axis motion.
The aim of the project is to play chess in a completely automated environment.
Drawing Robot/Pen Plotter/Drawing Machine is an Open Hardware version of the famous machine AxiDraw which it is a pen plotter, capable of wr