This system will water your plants automatically, monitor the level of the water reservoir and will keep your plants happy on many aspects.
This project creates a way to monitor water usage, to reduce water costs.
Build a home automation system with a Blynk user interface, an alarm system, dimmable lights, timers, and remote controlled appliances.
I've made a few smoker controllers in the past and monitoring tools to go with them.
Сrazymeter is the hardware/software complex that is used to rank how crazy are your bicycle rides.
The iBrake system allows the girls to have the freedom but me the piece of mind knowing that i can stop their bikes remotely from up to 100.
Don't want to hard code your Blynk AuthID or WiFi credentials into your code? Then use Embedis to store and change them on-the-fly!
Water is essential for life. Save water is saving Earth. So, why not use Blynk Board to save Earth?
The IoT egg tray lets you know how many eggs you have left in the fridge and also shows temperature & humidity of your fridge.
This walks you through the Blynk boar'd's firmware.
Wearable posture correction. If the sensor detects low muscle activity, a vibration notifies the user.
Monitor real power, voltage, current and power factor using the Sparkfun Blynk board and view live graphs in the Blynk App.
Use the Blynk app to control the RGB LED, the onboard LED, and the LED expansion from your phone.
A lock which allows remote locking and un-locking. An user does not need to walk to the door to open or lock a door.
An easy to user experiment toolkit for the classroom to measure temperature and humidity and observe from your smartphone.
Learn how to get started with the Sparkfun Blynk Board (SBB) and connect it to the internet.
The bird house will be outfitted with IOT to track what kind of conditions attracts guests and will tweet you when they are at the door!
I changed ordinary boring desk lamp into Blynk controlled device :)
Knowledge is power. Brewing in the summertime is a definite problem if you don't have a way to keep the fermenter cool.
This guide shows you how to add Blynk Board support to the Arduino IDE.
Quick way to control Servos using minimal resources. The easiest way of controlling an robotic arm which has couple of servo motor's.
Sparkfun controlled lamp.
Get up the minute info about the current temperature and humidity in your home and be alerted when these values pass preset warnings.
This project uses Blynk (Esp8266), a 3-D printed hand, and two servos to make a remote controlled Halloween hand gag.