Smart Garden IOT System including automated watering system, Smart Surveillance system using PIR sensor, smart Gating system using ultsonic.
Have your plants water themselves when the soil moisture is low!
Soil Moisture Data Retrieval system using Tuya, Tuya Smart Android App, ESP32, Moisture Sensor, Python and Arduino IDE in.csv format
Set up your Pi to automatically take care of a house plant by reading a moisture sensor and watering when needed.
Android application monitoring system for GreenHouse, several sensors for reading data and send to application.
This project will show you how to make an automated watering system and water level indicator.
Objectives: Heating, aeration, and irrigation. Behavior: Event when the temperature is low or high and the soil is dry. (Videos on Story)
Soil moisture sensor which gives you LCD display of percentage of moisture.
Use a fleet of devices to monitor the soil in an agricultural field or greenhouse, and visualize the data remotely.
This can separate dry waste and wet waste successfully.
Real-time visibility and control of water, process farming, weather & wells - from anywhere.
Monitor remote soil moisture sensors at a glance.
Octopod, a uniquely shaped full automation system that allows you to monitor your industry and keep security with AI and smart RFID locks.
digiPlant tweets and displays live and historical data collected by soil moisture, temperature, and brightness sensors.
This moisture sensor sends hourly updates to Ubidots and Pushover, and runs for years on solar power.
I have a history of over/under watering plants. Herb(ert) combines sensor data with edge IoT logic to automate watering and stay healthy!
This system automatically detects the soil moister via a soil moisture sensor.
Making a plant self watering system using SparkFun's Soil Moisture Sensor
NodeMCU ESP8266 board which monitors the soil moisture of your plants and notifies you on Telegram when they need to be watered!
Your plant will have the needed water for months. Displayed: humidity and time since last pumped water! Cheap and only a few components!
Raspberry Pi master, I2C Arduino gateway, software PWM servo, ADS1115 ADC and other sensors connected in order to water our plants.
Using Win10 IOT, RPi2, and XBee, measure lawn soil moisture, and automatically run irrigation as necessary.
The irrigation system based on AI is made with an Arduino UNO and soil moisture sensor. The control system uses neurons to make decisions...
A cube with all the necessary sensors, suitable for a wide range of applications like agriculture. Know the land beneath you!