FreeRTOS, simple, easy to use, robust, optimised for Arduino IDE.
Full access to FreeRTOS capabilities, within classic Arduino environment.
Jrobot Delivery is ready to deliver your next pizza!
DIY game controller project with a Pro Micro which uses an ATmega32U4 microcontroller for emulating a game controller.
Do you always slack off on your computer and worry about getting busted? Not anymore!
A 4x4 keypad that uses mechanical switches with individually backlit keys powered by an Arduino Pro Micro.
The 8BitCADE XL is an educational, DIY Game Console that you create to learn in a fun and rewarding way – learn electronics & programming wh
Timing gates are expensive to buy but not that hard to code. These are designed for horse back archery but would fit any sport.
I attempt to map the shape of my room using four HC-SR04 Ultrasonic distance sensors and a magnetic compass to measure the heading.
MIDI controller built with a SparkFun Pro Micro, allowing for MIDI over USB, and 16 LED arcade buttons.
With a simple rotary encoder and an Arduino Pro-Micro you can control most media players with play, pause, next, prev, volup, voldown.
This is a simple project that will allow you to remotely control the display of presentations on your computer.
Just another Pro micro Volume Knob Setup with POTENTIOMETER
This Raspberry Pi-compatible device lets you use joysticks as a mouse and enter keyboard and modifier keys with two dynamic keypad options.
Laser Cut Arduino Midi Drum Pads and Audio Waveform Visualizer
An Arduino-based USB keyboard simulator which injects keystrokes via Bluetooth protocol or predefined payloads in SD card.
Using Arduino and ATtiny85, send and run MIDI signals to Arduino through MIDI communications.
Simple Arduino-based 30-minute alarm clock with gentle "gong" sound.
Arduino pro micro based advanced macropad with joystick, 2 rotary encoders, 4x4 button matrix (4 breakouts), and 3 stand-alone buttons.
One big button for your computer, for special occasions: publishing articles, releasing apps, or sending out big emails. 😁
Yet another temperature monitoring setup with NTC, SSD1306 OLED and NodeMCU
This little project is just something that was floating around in the back of my head for about 9 months and I can share it now.
Utilizing functions of SIM800L module beyond call & SMS using Pro Micro or Mini (ATmega32U4/ATmega328P) and Nokia 5110 (PCD8544) display.
An Arduboy-compatible DIY console.
Easy to build 3D-printed ortholinear keyboard with replaceable keycaps and QMK FW.